Owens Corning Roofing in Century City, CA

Owens Corning Roofing in Century City, CA | Gable Roof Repair

We provide independent Owens Corning repair in Culver City and across Century City, including flat-roof patching, flashing repair, and leak tracing on the high-rise and podium buildings that define the 90067 skyline. What sets our Owens Corning work apart here is simple: almost nobody else treats Century City as what it actually is. It’s a dense commercial and luxury condo district built on the old 20th Century Fox backlot, and the roofs are membrane systems on towers, not shingle fields on pitched houses. Call (866) 650-8319 for a free estimate.

Call (866) 650-8319

We’re Gable Roof Repair, and we work with seven major shingle manufacturers, including Owens Corning sales & service, because the material should fit the roof, not a sales quota. Neil Drummond, our owner, grew up watching older buildings show their age and learned early that the roof is where most failures start. That’s the lens we bring to every Owens Corning repair in Century City.

Why Century City Residents Choose Us for Owens Corning Service

We know Owens Corning products from the deck up. Duration Series shingles on mechanical penthouse roofs, Oakridge on podium-level accessory structures, TruDefinition Duration on the steep-slope accent sections of mixed-use buildings, and Deck Defense underlayments beneath membrane systems. We understand how each one fails, and more importantly, how they fail in Century City specifically.

But the bigger reason property managers and HOA boards call us is the repair-first philosophy. Our name says it. We don’t arrive with a replacement quote already written. We arrive to diagnose. If a targeted flashing repair using genuine Owens Corning materials and proven aftermarket membrane products will hold for years, that’s the recommendation. If the roof has genuinely reached the end of its service life, we’ll tell you that too, with the evidence to back it.

We’re an independent contractor, not an Owens Corning factory representative or an authorized dealer. That matters. It means we’re free to pair Owens Corning shingles and underlayments with the best membrane and flashing products for flat and low-slope commercial decks, which is exactly what Century City roofs demand. Inspection first, recommendation second. That’s the whole approach.

Common Owens Corning Roofing Problems We Solve in Century City

• Abandoned curb and vent boot leaks on older towers. On the Century Park East and Century Park West buildings, decades of cell and PV installations and mechanical swaps have left patch-scarred penetrations through the original membrane. The leak presents as a field issue but traces to a forgotten curb, and the Owens Corning asphaltic base and underlayment layers at those terminations are usually where water finds its way in. We open the curb, rebuild the flashing, and tie in with compatible materials.
• UV and thermal-cycling degradation on flat and low-slope decks. Century City sits close to the marine layer but bakes in summer sun. That cycle, day after day, breaks down sealant strips and flashing adhesives on Owens Corning shingle sections used on penthouse roofs and terrace edge caps. The shingles themselves may look fine while the adhesive underneath has quietly let go.
• Santa Ana wind lift on parapet caps and slope transitions. When the Santa Anas blow through, Owens Corning shingle tabs and ridge caps on low-slope-to-steep transitions and parapet caps catch the wind first. We see peeled tabs and exposed underlayment in exactly those spots after a strong wind event, and the fix is about proper fastening and sealing, not just laying the tab back down.
• Penetration leaks from cell and PV arrays. Century City has more rooftop equipment per square foot than almost anywhere in Los Angeles. Every penetration is a potential leak path, and the Owens Corning products used around those penetrations, particularly the asphaltic base sheets, are the most common failure point we see on commercial flat roofs here.
• Terrace and amenity deck water intrusion. Many Century City high-rises have extensive rooftop terraces. Water that gets past the deck surface finds the roofing membrane below, and the tie-in between the Owens Corning underlayment and the membrane is a frequent weak point. We diagnose whether the leak is in the deck, the membrane, or the transition between them.

Owens Corning Service in Century City: What Local Conditions Mean for Your Roof

Here’s the thing about roofing in 90067 that you won’t hear from a generic Owens Corning service in West Hollywood or elsewhere: the roof isn’t above a homeowner, it’s above a tenant roster. Every repair we do on a Century City high-rise has to be sequenced around property-management approvals, freight-elevator windows, and rooftop mechanical access. You can’t just back a truck up to the curb and start pulling shingles. On a Century Park East tower recently, a persistent leak traced not to the field of the flat roof but to an abandoned cell-equipment curb from a prior remodel that had been patched over and forgotten. We opened the curb, rebuilt the flashing and tie-in with compatible membrane and Owens Corning underlayment detailing, and coordinated freight-elevator access and building-management sign-off so the repair didn’t disrupt tenant operations. That’s the actual job in Century City, and it’s a different trade from the single-family roofing done ten minutes away in Beverly Hills or Cheviot Hills. The roof doesn’t lie, the materials tell you exactly what went wrong and when.

Owens Corning Models & Products We Service in Century City

We service the full Owens Corning residential and commercial product range as it applies to Century City’s mixed flat and steep roof conditions. That includes the Duration Series architectural shingles you’ll find on mechanical penthouses and sloped accent sections, Oakridge Series on podium-level accessory roofs, and TruDefinition Duration on the steep-slope sections of mixed-use buildings. Beneath those shingles, we work with Owens Corning Deck Defense and other asphaltic base sheets and underlayments used under membrane systems on flat and low-slope decks.

For parts, we use genuine Owens Corning shingles, underlayments, and compatible accessories wherever the assembly was originally built around them. For the membrane and flashing side of a flat commercial roof, we pair those Owens Corning products with proven aftermarket membrane and flashing products suited to the specific deck condition. The goal is to match the existing system, not force a mismatched replacement. Seven brands, one standard of installation.

Owens Corning Service Pricing in Century City

FAQs – Owens Corning Roofing in Century City

Service Areas Near Century City

We serve Century City and the surrounding communities, including Century City service area coverage throughout 90067. For Owens Corning work in adjacent areas, see our Owens Corning service in Beverly Hills and Owens Corning service in Westwood pages. We also cover Irvine, Tustin, and Costa Mesa from our home base.

Book Your Owens Corning Service in Century City Today

If your Century City building has a leak, lifted shingles, or a failing flashing detail, call (866) 650-8319 for Century City Roof Repair. We’ll schedule an inspection, walk the roof with you or your building engineer, and give you a written line-item quote. The estimate is free, and the recommendation will be honest.

Written by Neil Drummond, Owner at Gable Roof Repair, serving Century City since our founding.