Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Burbank
Roof repair in Burbank typically runs $350 to $900 for shingle replacement and leak repairs, with more involved work like valley reconstruction or fascia replacement landing between $900 and $2,400. Most jobs we handle for flatland bungalow blocks and Verdugo foothill homes are scoped and completed within three to five business days once permits clear. If you’re looking at a sagging valley, water staining on a ceiling, or shingles that lifted in the last Santa Ana wind, call us at (866) 650-8319 and we’ll walk you through what’s actually going on before any quote is written.
We work across all four Burbank zip codes, from the 91501 and 91502 flatland blocks up through the 91504 and 91505 hillside streets. The housing stock here is older than most of the Valley: 1920s bungalows with original framing, 1940s ranches with shallow-pitch additions, and mid-century builds rising into the Verdugo foothills. That means our Roof Repair team spends as much time on leaf-clogged valleys, dry-rotted fascia, and tie-in work where new roofing meets old framing as we do on simple shingle swaps.
Why Gable Roof Repair Is Burbank’s Preferred Roof Repair Company
Burbank homeowners call us because we lead with inspection, not replacement. That’s not a slogan; it’s how Neil Drummond built the company. When a roof shows wear, the honest answer is sometimes a repair, sometimes a replacement, and sometimes a $400 flashing fix buys you five more years. We tell you which one, with photos and measurements, before you spend a dollar.
We’re certified to work with seven major shingle manufacturers, including GAF, CertainTeed, and Owens Corning. That matters in Burbank, where a 1940s ranch might carry original cedar shake under a later asphalt overlay, while the remodeled house next door has architectural shingles from an entirely different product line. Our crews understand the installation requirements and failure patterns across those lines. We work with your roof’s brand, not ours.
Local knowledge shapes every scope we write. We know that flatland bungalow streets in 91506 carry heavy street-tree canopy that dumps leaf load into valleys every time the wind kicks up. We know that foothill sections in 91504 and 91505 sit inside a Very High Fire Hazard Severity Zone, which changes the materials and detailing that belong on the roof. And we know Burbank’s permit and inspection pacing is stricter than Glendale or North Hollywood, so we build that lead time into the schedule from day one.
Styles & brands we work with
Shingle Roof Repair in Burbank
Shingle Roof Repair on a Burbank home usually means replacing wind-lifted or sun-brittle shingles before they let water into the decking. After decades of San Fernando Valley UV exposure, asphalt shingles turn brittle and lose their seal strip. A Santa Ana wind event then peels them back in sheets. On flatland bungalows in 91502 and 91506, we also see shingles fail early around old chimney and skylight penetrations, where original flashing was never updated. A basic shingle replacement in Burbank runs $350 to $900; if the area covers more than one roof plane or includes ridge cap work, expect $900 to $1,800.
Layered Tear-Off Repairs
Many 1940s and 1950s Burbank ranches still carry two or sometimes three layers of old roofing. The top layer can look fine while the layers beneath have trapped moisture and started rotting the decking. When we open a corner for shingle repair and find layered roofing, the right fix is a local tear-off down to sound decking, then fresh underlayment and shingles tied into the surrounding roof. That work usually lands between $800 and $2,400 depending on how far the rot has traveled.
Valley and Chimney Tie-Ins
Burbank’s mix of original bungalows and room additions means valleys and chimney penetrations are frequent leak sources. Old valleys fill with citrus leaves and street-tree debris, water backs up under the flashing, and the leak shows up on a ceiling. We strip the valley, check the framing beneath, lay new ice and water shield, and re-shingle with a closed-cut or woven valley that drains clean. Chimney tie-ins on older homes often need new step flashing and counterflashing while we’re in there.
Storm Damage Roof Repair in Burbank
Storm Damage Roof Repair in Burbank usually follows a Santa Ana wind event, and the damage pattern is consistent: shingles lifted at the rake and ridge, debris from overhanging street trees scattered across valleys and low-slope sections, and sometimes a branch impact that punctured through to the decking. We respond to these calls across 91505, 91507, and the flatland streets, and we scope each one the same way: document the damage, check the decking for moisture, and write a repair plan that restores wind-resistance at the perimeter. Minor wind repairs run $400 to $1,000; a branch impact or widespread lift across multiple roof planes runs $1,200 to $3,000.
Wind-Lifted Shingle Repair
When Santa Ana gusts hit 50-plus mph through the Verdugo passes, shingles with failed seal strips lift in clusters. The repair is straightforward but the detailing matters: each replacement shingle gets hand-sealed until the adhesive bonds, and we check the surrounding field for shingles that are about to fail the same way. On fire-zone homes we also verify that the lifted area is brought back to Class A assembly standards before we close the file.
Debris-Cleared Valley and Flashing Repair
After a windstorm, valleys across Burbank fill with citrus leaves, palm fronds, and broken limbs. Water finds the clogged valley and backs up under the flashing at the lowest point. We clear the debris, inspect the flashing for creases or corrosion, and replace any section that’s compromised. If the decking under the valley is soft, we cut back to solid wood and patch with matching sheathing before re-flashing.
Trusted Brands We Service in Burbank
We hold certifications with seven major shingle manufacturers, including GAF, CertainTeed, and Owens Corning. In practice that means a Burbank homeowner gets a real material choice: value three-tab or architectural lines when budget drives the decision, premium dimensional shingles when the house calls for it, and manufacturer-backed warranty paperwork no matter which line we install. We keep common shingle profiles in stock locally, so a repair on a 91501 bungalow doesn’t wait on a supply-house order from the other side of the Valley. Seven brands, one standard of installation.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Burbank Homes
- Layered tear-off hiding dry-rotted fascia. When old roofing comes up on a 1940s ranch, we regularly find the fascia board behind the gutter has turned to powder. It only shows once the old roof is off, and the repair scope grows mid-job. We photograph it, show you, and quote the added work before we proceed.
- Leaf and limb load in valleys and shallow-pitch tie-ins. Mature street trees and backyard citrus canopy dump debris into valleys every season. Water backs up under worn flashing, and the leak travels inside the home. Clearing the valley and replacing flashing solves it for years.
- Sun-brittle shingles and baked-out flashing sealant. Burbank summers push daytime roof temperatures well past 130 degrees. Seams in sealant and flashing dry out and crack, shingles lose flexibility and start to cup. Heat cycling is the slow killer; repair means replacing the brittle material, not patching it.
- Santa Ana wind lift on rake edges and ridge caps. The same streets that get hammered by hot, dry wind also sit in a fire hazard zone in the foothills. Lifted shingles at the rake aren’t just a leak risk; they’re a compliance issue. We re-detail the perimeter with wind-rated fasteners and Class A assembly materials where the zone requires it.
Pricing for Roof Repair in Burbank, CA
Here’s what Burbank homeowners should expect. Shingle replacement and minor leak repair: $350 to $900. Flashing repair around a chimney or skylight: $450 to $1,200. Valley reconstruction with new ice and water shield: $900 to $2,200. Fascia replacement discovered mid-repair: $25 to $45 per linear foot, including paint-ready trim. A lot with a detached garage, workshop, or ADU typically adds $300 to $1,500 to the total, depending on whether that structure needs its own repair and how accessible the roof planes are. Every estimate is free, written, and line-itemed. No change orders appear without your sign-off. Call (866) 650-8319 and we’ll schedule the inspection that starts the quote.
We Also Serve Cities Near Burbank
Our crews cover the neighboring San Fernando Valley cities too: Universal City, North Hollywood, Glendale, and Studio City. If you own a rental property in Burbank and a family home across the line in Glendale, one call handles both. Learn more about our full service area on the Burbank page.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Burbank
Yes, usually by $300 to $1,500. A detached garage, workshop, or ADU has its own roof planes, flashing, and potential leak sources, and we scope and quote it separately from the main house. The added cost depends on roof size, pitch, and whether the outbuilding needs shingle work, flashing work, or a tear-off section. We include every structure on the lot in the same free estimate, so you see the full number up front. Call (866) 650-8319 to schedule yours.
Burbank schedules and inspects re-roof and repair documentation more strictly than Glendale or North Hollywood, which adds lead time between scope approval and start date. A repair that’s mostly shingle work can often proceed under the same timelines, but if the job touches fire-zone detailing or structural decking repairs, we build the permit and inspection window into the schedule before we quote. We handle the paperwork so you don’t have to chase the city.
Heavy street-tree and backyard canopy drops leaves, twigs, and citrus debris into valleys and low spots constantly, which clogs drainage and backs water up under flashing. When we repair shingles under canopy cover, we also clear the valleys and check the flashing, because new shingles won’t stop a leak caused by a clogged valley. Some blocks in 91506 need valley maintenance every few years regardless of the shingle condition.
Yes. The Verdugo foothill streets in 91504 and 91505 sit within a Very High Fire Hazard Severity Zone, which means repair and re-roof work must use Class A fire-rated materials and ember-resistant detailing. That applies to shingle selection, valley treatment, and edge detailing. We spec the assembly accordingly and document it for Burbank’s inspection file.
Put the two quotes side by side and compare three things: what was opened and inspected during the scope, what materials and brand are specified, and whether the bid includes permit and inspection documentation. A lower bid that skips decking inspection or uses an unknown shingle line will cost more later. Our quotes are line-itemed, brand-specific, and include everything we know about the roof at the time of inspection. Call (866) 650-8319 and we’ll walk you through one.
Written by Neil Drummond, Owner at Gable Roof Repair, serving Burbank and the San Fernando Valley. Inspection first, recommendation second.