Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Bloomington
Roof replacement in Bloomington, CA typically runs $9,800 – $18,500 for a standard single-story asphalt shingle tear-off and re-roof on the mid-century homes that dominate the 92316 corridor. We get to Bloomington within 48 hours for a quote, often sooner. Gable Roof Repair has torn off more stacked, layered roofs along Valley Boulevard than most crews see in a career, and that experience matters when your decking is hiding what three layers of shingles covered up. Call (866) 650-8319 to schedule your free estimate, and we’ll give you the honest assessment the roof actually needs, not just a pitch for a full replacement.
Why Gable Roof Repair Is Bloomington’s Preferred Roof Replacement Company
Bloomington homeowners don’t want a sales pitch. They want someone who understands why asphalt shingles on a 1950s tract home near Valley Boulevard curl and break faster than ones on the coast. We work with your roof’s brand, not ours. That’s not a slogan. It’s how we operate. We’re certified across seven major shingle manufacturers, so when we quote a replacement, the material recommendation is based on what your roof and your lot actually need – not what we’re incentivized to push.
Neil Drummond built Gable Roof Repair around a repair-first philosophy. The company name says it. Before we recommend replacement, we inspect. If repair makes sense on a Bloomington roof, we’ll say so. If a full tear-off to deck is the only honest fix because the roof has been layered twice over since 1962, we’ll say that too – and show you why with photos from the deck.
Our crews know the 92316 housing stock. We’ve worked on compact lots where staging a tear-off means coordinating with neighbors, property line setbacks, and narrow side yards. We plan for that before the first shingle comes off. Estimates are free and line-item written, so you see exactly what you’re paying for before we order materials.
Call (866) 650-8319 and we’ll schedule an inspection. Inspection first, recommendation second. That’s the rule.
Styles & brands we work with
Roof Replacement Contractor in Bloomington
A Roof Replacement Contractor in Bloomington has to contend with what previous owners did to these roofs. The job starts with tear-off to deck – not a layover – because the stacked shingle layers common along the 92316 corridor hide exactly the problems that fail first: cracked decking, rotted substrate, failed flashing. We inspect the substrate before a single new shingle goes down. That’s the only way a replacement on a Bloomington home holds up through the next decade of inland heat and Santa Ana wind.
Full tear-off and deck inspection
Most Bloomington homes built between 1940 and 1975 have at least two layers of shingles. Some have three. Re-roofing over them saves nothing in the long run. We strip to deck, check for soft spots and dry rot, and replace any compromised plywood before underlayment and new shingles go on. This step adds labor you won’t see on a cheap quote, but skipping it is how you pay for a second roof in eight years.
Flashing and patio cover coordination
Unpermitted patio covers and additions are all over Bloomington. They show up in old assessor records or not at all. These structures create flashing transitions that leak if they’re not detailed properly. We identify them early and write the flashing scope into the quote. That’s not something most estimators flag before work starts.
Asphalt Shingle Roof Replacement in Bloomington
Asphalt Shingle Roof Replacement in Bloomington is the most common full replacement we perform, and the inland heat treats shingles hard out here. The roof surface on a summer afternoon near Cedar Avenue and Valley Boulevard can exceed 150°F. That heat bakes the asphalt, drives off volatiles, and leads to early granule loss and thermal cracking. You need a shingle rated for it – and we’ll show you the options from IKO and Atlas rather than defaulting to whatever one rep pushes.
Architectural shingle options
Architectural shingles handle Bloomington’s heat better than three-tab basics. They’re thicker, they seal better in wind, and they hold up to the dry blunt heat the Inland Empire throws at them. We quote these as standard on most replacements here, with Atlas and IKO lines that span value to premium tiers depending on your budget and roof pitch.
Underlayment and ventilation
What goes under the shingle matters as much as the shingle. We do full underlayment replacement and check attic ventilation on every Bloomington replacement. Most mid-century homes here are short on intake air. That shortens shingle life and voids some manufacturer warranties. We correct it as part of the scope, in writing, priced where you can see it.
Trusted Brands We Service in Bloomington
We’re brand-agnostic by design. Gable Roof Repair holds certifications with GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. On Bloomington replacements, we often quote IKO and Atlas for their heat-tested asphalt blends, and Tamko when the homeowner wants a specific architectural profile. Boral makes sense when you’re dealing with a hill-adjacent lot that gets pounded by wind-driven grit. The point is the roof’s brand, not ours. Your home’s exposure and deck condition drive the material call, and we complete the manufacturer’s workmanship requirements on every install. Seven brands, one standard of installation.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Bloomington Homes
These are the failure patterns we actually run into on Bloomington roofs. Not generic roofing problems. These are the ones that show up when you tear off a roof that’s been sitting in inland heat for 40 or 50 years.
- Stacked shingle layers hiding failed decking. Two or three layers of old shingles trap heat against the plywood underneath. By the time we tear off, the decking is often delaminated or rotted in patches around the eaves and valleys.
- Failed flashing at unpermitted patio covers. Do-it-yourself additions and old patio covers were rarely flashed properly where they meet the roof. They leak for years into the soffit and the wall cavity before anyone sees water inside.
- Wind-driven grit clogging valleys. Homes on the north side of Bloomington near the foothills collect sand and fine debris in the valleys during Santa Ana events. That same grit compresses the roofing cement and accelerates flashing corrosion at the valley metal.
- Inadequate attic ventilation accelerating shingle aging. The original mid-century roofs often had one small gable vent for the entire attic. In summer, that bakes the shingles from underneath. It also drives interior temperatures up and pushes humidity into the decking.
Pricing for Roof Replacement in Bloomington, CA
Roof replacement pricing in Bloomington is driven by square footage, layers to tear off, and decking condition. A standard single-story 1,200 – 1,500 sq ft home runs $9,800 – $13,500 for an architectural asphalt shingle tear-off and re-roof with new underlayment and flashing repair. If the roof has stacked layers and needs significant decking replacement, $13,000 – $18,500 is realistic for the same footprint. Premium architectural shingles from Atlas or IKO sit near the top of that range. The price is fixed in writing before materials are ordered. No change orders when we find what the layers were hiding – because we already accounted for it in the quote. Call (866) 650-8319 for an exact number. Our estimates are free, line-item written, and we walk you through the reasons behind each line.
A note on lead times: specialty and high-end shingles often carry manufacturer delivery windows measured in weeks, not days. We order early and coordinate scheduling around the material arrival so the project doesn’t stall mid-tear-off. That’s part of the discipline that keeps a Bloomington replacement moving.
We Also Serve Cities Near Bloomington
Gable Roof Repair serves Bloomington and the surrounding Inland Empire communities, including Fontana, Rialto, Glen Avon, and Pedley. If you’re in one of these areas and considering Roof Replacement, the same inspection-first approach applies. For Bloomington-specific questions, see Roof Replacement in Bloomington.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Bloomington
A full tear-off is usually necessary in Bloomington because many mid-century homes along Valley Boulevard and the broader 92316 corridor have two or three stacked layers of asphalt shingles. Layering new shingles over old ones traps heat in the decking, conceals rotted plywood, and violates most manufacturer warranty requirements. The honest fix is to strip to deck, inspect and repair the substrate, then install new underlayment and shingles. On a 1950s custom home near Valley Boulevard, our crew tore off three layers and found rotted decking and failed flashing at a patio cover addition. We replaced the decking and installed ice and water shield in the valleys before the new roof went on. That’s the standard, not the exception. Call (866) 650-8319 and we’ll show you what your roof actually has on it.
We order specialty materials immediately after a signed quote and deposit, before tear-off is scheduled. Long-lead architectural shingles and specialty underlayment from manufacturers like Atlas or Tamko can take two to six weeks to arrive. Rather than tearing off your roof and leaving it exposed while we wait on materials, we hold the tear-off until the shingles are physically at the distributor in the Inland Empire. We cross-check arrival windows with the manufacturer’s regional rep, then we lock a start date. This is part of why we price with fixed numbers in writing before work begins – lead times are a known variable we build into the schedule, not a surprise. Call (866) 650-8319 to talk through material timing for your specific roof.
For Bloomington’s persistent inland heat and dusty wind events, we typically recommend architectural asphalt shingles from IKO or Atlas. These lines are built with higher-grade asphalt blends and reinforced mats that resist thermal cracking better than entry-level three-tab shingles when roof temperatures pass 150°F. For homes on the northern edge of Bloomington that take Santa Ana wind and airborne grit from the foothills, Boral or Atlas lines with high wind-uplift ratings make sense. We’re certified across seven manufacturers, so the recommendation is based on your exposure and deck condition, not a preferred-margin product. Call (866) 650-8319 and we’ll walk you through which material fits your lot.
Unpermitted additions and patio covers create flashing transitions that were rarely installed to code. We see them on a large share of the mid-century homes in Bloomington. These additions change roof geometry, create new valleys and sidewall intersections, and often hide water intrusion that’s been leaking into the framing for years. We document them during the inspection and write the necessary flashing work into the replacement scope. We don’t report the addition to the city – we’re not building code enforcement. But we do make sure the new roof seals correctly at every junction, because that’s what keeps the replacement from failing at the same points the old roof did. Call (866) 650-8319 for an inspection if you suspect your home’s addition was never properly flashed.
Yes. We coordinate directly with architects, designers, and general contractors on high-end Bloomington replacements, and we handle the material ordering and schedule around their specifications. On one 1950s custom home near Valley Boulevard, the homeowner’s architect specified a GAF Designer shingle to match the home’s original character. We ordered the specialty shingles early, which kept the project on schedule despite the manufacturer’s lead time. We also worked with the architect to detail valley flashing and patio cover transitions to the existing design. If you’re working with a designer, bring us in early. The earlier we’re in the conversation, the fewer surprises hit the schedule. Call (866) 650-8319 to schedule a joint site meeting.
Written by Neil Drummond, Owner at Gable Roof Repair, serving Bloomington and the Inland Empire.