Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Fontana
Roof replacement in Fontana typically runs between $9,800 and $18,500 for a standard single-family home, depending on the roof’s size, pitch, and whether the old decking needs to come out. Most tear-off and reroof jobs here take three to five working days once materials land. If you’re seeing curled shingles, granule loss in the gutters, or water stains on the ceiling after a Santa Ana event, call Gable Roof Repair at (866) 650-8319. We work throughout Fontana and the surrounding Inland Empire, and we’ll give you a straight answer about whether you need a repair or a full Roof Replacement before anyone tries to sell you anything.
Why Gable Roof Repair Is Fontana’s Preferred Roof Replacement Company
Fontana homeowners call us because we lead with inspection, not a quote. That’s the whole reason the company is named Gable Roof Repair, and it’s how we’ve built our reputation from Bloomington to Glen Avon and across the 92335 core. We work on seven major shingle brands, GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, so the material recommendation we make is based on what your roof actually faces, not on whatever single brand happens to be in the warehouse.
Our crews are on Fontana rooflines every week. We know what the Cajon Pass wind does to a ridge line. We know which 1980s tract homes in 92337 were built with thin decking that softened over time. And we know that a homeowner off Sierra Avenue wants a straight answer about whether their roof has five years left or needs attention this year. Local knowledge like that only comes from doing the work here, not from dispatching a crew from an hour away.
Neil Drummond runs our Fontana projects personally. When you call, you’re talking to people who have walked these streets and climbed these roofs. The inspection is separate from any sales conversation, so you get a real assessment first. Repair when it makes sense, replace when it’s right.
Styles & brands we work with






Reroofing in Fontana
Reroofing in Fontana means replacing the entire shingle system, underlayment, flashing, and often the decking beneath it, rather than laying a second layer over what’s already failing. We see this need constantly in older 92335 tract homes, where original plywood decking has absorbed decades of heat cycling and occasional winter moisture, and simply covering it would leave a soft base under a brand-new roof. A complete reroof on a typical 1,600 to 2,200 square foot Fontana home runs $11,000 to $18,500 when decking repair is involved.
The process starts with a full tear-off down to the sheathing. We inspect every sheet of decking, replace what’s questionable, then lay new synthetic underlayment with ice and water shield through valleys and around penetrations. Architectural shingles go down with a six-nail pattern, not the four-nail minimum, because the Santa Ana gusts that rip through the pass will find a short-nailed tab faster than any inspector ever could.
Tear-Off and Decking Replacement
Most Fontana homes built before 1990 need at least some decking work during a reroof. Heat baking through the roof for thirty or forty years dries out plywood, and when monsoon rain or a wind-driven downpour finds a failed flashing, that moisture collects on wood that can no longer dry evenly. We replace damaged sheets with CDX plywood rated for the roof’s pitch and nail spacing, and we won’t bury soft decking under new shingles just to finish a day earlier. The deck is the roof’s foundation, and a new shingle system on a spongy deck is a future leak waiting for the next big storm.
Architectural Shingle Specs for Inland Heat
Fontana’s sun does not treat three-tab shingles kindly. South- and west-facing planes routinely see surface temperatures that crack and dry the asphalt years before a coastal roof would show the same wear. We typically spec architectural shingles from GAF, CertainTeed, or Owens Corning for these exposures, because their thicker construction and higher wind ratings match what this city actually throws at a roof. Tamko and Atlas options work well for mid-range and premium tiers, and the choice really comes down to your roofline’s exposure and your budget.
Flat Roof Replacement in Fontana
Flat roof replacement in Fontana covers the low-slope sections on 1960s and 1970s ranch homes, addition rooflines, and the occasional modern build where the architectural style calls for a nearly level plane. We see these most often on homes in 92335 and 92337, where original built-up or modified bitumen roofs have baked under thirty or forty summers of 100-degree heat and now show blisters, cracks, and seam separation. A flat roof replacement on a typical 800 to 1,500 square foot low-slope section in Fontana runs $8,500 to $15,000 depending on the system and whether the existing layers need full removal.
Flat roofs fail differently than pitched roofs. Water doesn’t run off quickly, so every seam, penetration, and edge detail matters more. We remove the old membrane to inspect the decking, address any sag or water damage, then install a multi-ply system with sealed seams and proper slope reinforcement so water actually moves toward the drains instead of pooling where the old roof sagged. The heat here makes single-ply seams expand and contract hard, so we lean on systems with heat-welded or adhered seams that stay closed through the temperature swings.
Low-Slope Membrane Systems
Fontana’s flat roofs live and die by membrane choice. Modified bitumen and TPO systems both work here, but the decision depends on your roof’s foot traffic, parapet details, and how much direct afternoon sun the plane takes. A darker membrane absorbs more heat and ages asphalt faster, while reflective TPO sheds some of that energy but demands clean, tight seam work. We match the membrane to the roof’s actual conditions and the manufacturer’s installation requirements, because a flat roof leak in Fontana usually means a call two years later when the first real rain finds the weak seam.
Trusted Brands We Service in Fontana
We’re brand-agnostic, and that matters in a market like Fontana where heat and wind punish shingles in different ways depending on the roofline. GAF and CertainTeed architectural lines carry strong wind ratings for the Santa Ana corridor. Tamko and Boral give homeowners solid mid-range and premium options when the budget allows for upgraded material. We stock common accessories locally and source full material kits from suppliers who deliver across the Inland Empire, so a roof replacement in Fontana doesn’t stall waiting on a truck from out of state. Seven brands, one standard of installation. Your roof’s job is to protect everything underneath it, and we match the material to that job, not the other way around.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Fontana Homes
- Santa Ana wind uplift along ridges and fascia edges. Gusts coming down the Cajon Pass curl shingle tabs at the roof’s edges first, and a short-nailed starter strip lets the whole edge peel before the field even shows damage. We see this constantly on 1980s and 1990s subdivisions across 92337 and 92334, where the original nailing patterns were never meant for this wind corridor.
- Heat-cracked and oxidized asphalt on south-facing planes. The same sun that makes Fontana summers brutal dries out shingles from the top down, and south- and west-facing slopes crack and lose granules years before the north side shows any wear. A roof here often fails from two directions at once: wind on the edges, heat on the field.
- Soft or rotted decking on older 92335 tract homes. Original plywood from the post-WWII building boom has often softened under decades of heat cycling and intermittent moisture, and it might not be visible until the old shingles come off. During a reroof, we frequently replace decking around chimneys, valleys, and plumbing stacks where water found its way in.
- Failed flashing and penetration seals ahead of winter rain. Santa Ana wind dries out caulk and sealant, and when the first real rain arrives in late fall, it finds those cracked pipe boots and dried vents. Older homes in the Fontana core see this first, and it’s often what prompts the call that leads to a full replacement rather than another patch.
Pricing for Roof Replacement in Fontana, CA
A complete roof replacement in Fontana generally lands between $9,800 and $18,500 for a standard single-family home, with $12,000 to $14,000 being the most common range we quote on typical 1,800-square-foot tract homes. Architectural shingles run $4.50 to $6.50 per square foot installed, depending on the brand and warranty tier. Full tear-off with decking replacement adds $2,000 to $5,000 depending on how many sheets need to come out. Flat roof sections run $8,500 to $15,000 as a separate scope or as part of a whole-roof job. Every quote is a written line item, and the price we quote is the price you pay unless you ask us to change scope after work starts. Call (866) 650-8319 to schedule a free estimate, and we’ll walk the roof with you before any numbers get discussed.
We Also Serve Cities Near Fontana
Our Roof Replacement in Fontana crews regularly work in Bloomington, Rialto, Glen Avon, and Pedley, and we’re familiar with how the same wind corridor and heat profile affect roofs across the whole stretch of the Inland Empire. If you’re in one of those neighboring communities and looking at a roof that’s showing heat cracking or wind damage, the same inspection-first process applies.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Fontana
Because coastal specs are built for salt air and marine moisture, not for 100-degree UV cycling and Santa Ana wind uplift. A roof spec that assumes salty fog will corrode fasteners spends its budget on stainless hardware and sealed everything, while a Fontana roof wears out from thermal cracking and wind-lifted tabs long before corrosion becomes the issue. When the fasteners are over-spec’d for a problem Fontana doesn’t have, the shingle system itself often gets under-spec’d for the problems we do have. You pay less at install and more in repairs and early replacement. We spec for the failure modes that actually show up in Fontana, then add the stainless and hot-dip hardware where winter rain and monsoon moisture pool at valleys, penetrations, and drip edge. Call (866) 650-8319 for an exact quote based on your roof’s real exposure.
Check whether both bids include tear-off, decking replacement as needed, new underlayment, ice and water shield, flashing, ridge vent, and haul-off. A low bid that skips decking inspection or reuses old flashing is not cheaper, it’s just hiding the cost until the first leak. Ask whether the nailing pattern is four-nail or six-nail, because Santa Ana winds will exploit a short-nailed starter strip within a few seasons. Ask which shingle brand and line is quoted, and whether the warranty is manufacturer-backed. And ask if the inspection was done before the quote or the quote was done before anyone climbed the roof. The fair comparison is a written line item from both, an apples-to-apples stack of materials and labor. Call (866) 650-8319 and we’ll explain what we recommend for your Fontana home and why.
Yes, but not in the way a coastal roofer might assume. Fontana sits inland of the marine layer, so salty air and fog mostly drop out before they reach the Inland Empire. The real driver is thermal expansion: 100-degree afternoons and cold winter nights make metal flashings expand and contract thousands of times over a roof’s life. We use hot-dip galvanized or stainless fasteners at valleys, penetrations, and drip edge where moisture can pool, and we seal those transitions so they stay closed through the temperature swings. The spec fights heat and wind first, not salt corrosion. For a roof in the 92335 core with original flashing, we’ll show you exactly what’s near the end of its life. Call (866) 650-8319 to have us take a look.
Gusts coming down the Cajon Pass hit your roof’s edges and ridge lines hardest. Shingle tabs along the fascia curl upward, and if the starter strip was short-nailed or the original roof used a three-tab product with a low wind rating, the whole edge can peel before the field shows any damage. We’ve torn off roofs in Fontana where south-facing planes were heat-cracked and ridge edges were wind-curled at the same time. Two failure directions on one slope. That’s why we spec a six-nail pattern with architectural shingles and a reinforced starter strip on every replacement we do here. If you walked your roof after the last wind event and saw lifted tabs, call (866) 650-8319. We’ll tell you honestly whether it’s repairable or a full replacement makes sense.
Most of them do, yes. The post-WWII tract homes in the 92335 core were built with plywood decking that has now absorbed forty to seventy years of heat cycling and intermittent moisture. When we tear off the old shingles, we routinely find soft spots around chimneys, valleys, and plumbing penetrations that were never visible from inside the attic. Reusing that decking under a new roof means the new shingles are only as solid as the wood beneath them. We replace what’s questionable and then lay new underlayment over a clean, solid deck. It’s more work up front, and it’s what keeps a Fontana reroof from becoming a leak in two years. Call (866) 650-8319 to schedule a free inspection and we’ll show you what’s under your current shingles before you commit to anything.
Written by Neil Drummond, Owner at Gable Roof Repair, serving Fontana and the surrounding Inland Empire with inspection, repair, and replacement services.